The wood-heated parking heater is a very practical device that can provide a warm environment for the vehicle in the cold winter, so that the owner does not have to worry about the temperature in the car before driving. However, the wood-heated parking heater will also encounter some problems during use, the most common of which is the sensor failure problem. This article will introduce how to solve the problem of diesel heating parking heater sensor failure.
Tip: In order to avoid frequent failures and avoid affecting the use, try to choose a quality guaranteed wood heating brand, such as Birelf parking heater.
First, the performance of sensor failure
Sensor failure can cause the wood-heated parking heater to not work properly, which is manifested in the following situations:
1. Heater cannot start: When the sensor fails, the heater cannot detect the temperature in the car, so it cannot start.
2. Stop the heater immediately after starting: When the sensor fails, the heater may start, but it will stop working immediately because it cannot detect the temperature in the car normally.
3. Heater can not be stopped: When the sensor fails, the heater may keep working and cannot be stopped.
Second, the method of troubleshooting the sensor
If the above situation occurs, it is necessary to eliminate the sensor fault in time, the following are some possible solutions:
1. Check the cable of the sensor: The cable of the sensor may be loose or damaged, causing the sensor to fail to work properly. Therefore, it is necessary to check whether the connection line is firm, and if it is found loose or damaged, it needs to be replaced in time.
2. Replace the sensor: If the cable of the sensor is normal, but it still does not work properly, you may need to replace the sensor. It should be noted that different models of wood-heated parking heaters may use different sensors, so you need to choose the right sensor for replacement.
3. Clean the sensor: The sensor may be covered with dust or oil, resulting in normal operation. Therefore, the sensor needs to be cleaned regularly to ensure that it is working properly.
Post time: Aug-07-2024